UFT-L Archives

Archiver > UFT > 1999-12 > 0944934256


From: "Jerry Fillebrown" <>
Subject: Re: [UFT] Renumbering Records
Date: Sat, 11 Dec 1999 11:44:16 -0600


As I recall all you need to do is replace an assigned number with "1" and
UFT will search for the next unused number. Same procedure works for
Places.

I wouldn't do this unless you have run Pack. Sometimes old pointers seem to
hang around and could cause problems.

Regards

Jerry
----- Original Message -----
From: "Ron Chenier" <>
To: <>
Sent: Saturday, December 11, 1999 4:40 PM
Subject: Re: [UFT] Renumbering Records


> Ron,
>
> I think you can re-use those deleted record numbers. I have done it myself
> successfully, I think. No problems so far.
> If you know the record number just call the next new individual, go to the
> record number and delete that new number and give it the number that was
deleted
> previously. Proceed to assign this once deleted number with the necessary
> particulars and links, then save that record number.
>
> When you next want to add another individual in your project, just
remember that
> number you last replaced with your old deleted number and use it for the
next
> individual if it is not assigned any data or events.
>
> Don't know if UFTEngineering or Melissa would object to this process.
>
> Give it a try and see what happens.
>
> Good luck,
>
> Ron
>
> ----- Original Message -----
> From: Ron Stonehouse <>
> To: <>
> Sent: December 11, 1999 4:31 PM
> Subject: [UFT] Renumbering Records
>
>
> > Just wanted to know if there is any way to renumber or reassign the
> > individual record numbers of the records in UFT 3.0. From time to time
(as
> > we probably have all done) I have had to delete a record(s) from the
> > database. This then leaves a missing record number(s) in the sequence.
For
> > example if I have created 100 individuals and then found it necessary to
> > delete records (individuals) 53, 61, and 88 then these do not appear to
> > ever get reused.
> >
> > Thanks
> > Ron Stonehouse
> >
> >
> >
> > ==== UFT Mailing List ====
> > *********************
> > UFT-L MAILING LIST
> > http://www.uftree.com/
> > To unsubscribe, send the command "unsubscribe" to

> or
> > , depending on which you originally subscribed
to.
> >
> > ==============================
> > Free Web space. ANY amount. ANY subject.
> > RootsWeb's Freepages put you in touch with millions.
> > http://cgi.rootsweb.com/cgi-bin/acctform.cgi
> >
>
>
> ==== UFT Mailing List ====
> ***********************
> UFT-L MAILING LIST
> Bringing users together
> http://www.uftree.com/
> To unsubscribe, send the command "unsubscribe" to
or
> , depending on which you originally subscribed
to.
>
> ==============================
> Free Web space. ANY amount. ANY subject.
> RootsWeb's Freepages put you in touch with millions.
> http://cgi.rootsweb.com/cgi-bin/acctform.cgi
>

This thread: