GENBOX-L Archives

Archiver > GENBOX > 2008-07 > 1216412913


From: "wim prange" <>
Subject: Re: [GENBOX] Family Group Report Problem
Date: Fri, 18 Jul 2008 22:28:33 +0200
References: <003701c8e8db$e6fb7460$6401a8c0@ComputerRoom> <000001c8e8e3$323a4940$96aedbc0$@co.uk><003f01c8e8f7$752786f0$6401a8c0@ComputerRoom> <000101c8e8fa$37ce8ad0$a76ba070$@co.uk><004a01c8e909$fa99f3b0$6401a8c0@ComputerRoom>
In-Reply-To: <004a01c8e909$fa99f3b0$6401a8c0@ComputerRoom>


My ideas are running out fast:
does it happen with the other family group report (with media instead of
basic)?
does it happen with another individual with two marriages and children with
each spouse?

Wim

> -----Original Message-----
> From: [mailto:]
> On Behalf Of Karen Carrigan
> Sent: vrijdag 18 juli 2008 21:11
> To:
> Subject: Re: [GENBOX] Family Group Report Problem
>
> Neither of the spouse identifiers are set to "Exclude".
> I ran each maintenance function, closed Genbox and rebooted to no
> avail.
> I have gone through each individual page for both ladies and find
> nothing
> marked "exclude".
> Any other ideas greatly appreciated.
>
> Karen Carrigan
>
> 791-9757 (home)
> 969-0434 (cell)
>
>
> -----Original Message-----
> From: [mailto:]
> On
> Behalf Of wim prange
> Sent: Friday, July 18, 2008 12:18 PM
> To:
> Subject: Re: [GENBOX] Family Group Report Problem
>
> When the Identifier-setting for preferred spouse is set to "Omit", then
> the
> Wife-field is omitted from the report entirely.
>
> Ideas you could try:
> Check the names of the spouses involved (Identifier-tab): is any name
> specified as preferred? Is it set to "Exclude"?
> Run the maintenance options from the File-menu.
> Close and re-open Genbox.
>
> Hope one of them does the trick.
>
> Wim
>
>
> > -----Original Message-----
> > From: [mailto:genbox-
> ]
> > On Behalf Of Karen Carrigan
> > Sent: vrijdag 18 juli 2008 18:58
> > To:
> > Subject: Re: [GENBOX] Family Group Report Problem
> >
> > The report is not generating the "Wife" field at all. However, it
> does
> > generate the names of her parents.
> >
> > I checked my report settings and "Preferred" is set for All, Primary,
> > Preferred Spouse, Other Spouse, Children CF, and Children NCF. I
> went
> > in to
> > the Identifier settings, cleared them, and re-ticked the "Preferred"
> > check
> > box. Still not getting the "Wife" field outputted to report.
> >
> > Any other idea greatly appreciated...
> >
> >
> >
> > Karen Carrigan
> >
> >
> >
> >
> > -------------------------------
> > To unsubscribe from the list, please send an email to GENBOX-
> > with the word 'unsubscribe' without the quotes
> in
> > the subject and the body of the message
>
>
> -------------------------------
> To unsubscribe from the list, please send an email to
> with the word 'unsubscribe' without the
> quotes
> in the subject and the body of the message
>
> -------------------------------
> To unsubscribe from the list, please send an email to GENBOX-
> with the word 'unsubscribe' without the quotes in
> the subject and the body of the message

This thread: